Positron – Cyclotron LEDs

Just a quick update to let you know that work on the Positron is progressing well, and I expect to release a video of it in action later this week!

In the meantime, here are some beauty shots of the new RGB LED cable for the color changing cyclotron:

IMG_3648 IMG_3647

And a shot of the vibration motor and volume pot:


Note that the volume pot can be installed in the thrower or pack.  Here it is pictured connected to the thrower’s switch module.

If installing the volume pot in the thrower it will be up to you to figure out the knob arrangement for it.  You could for example install it in the knob next to the Clippard, but chances are you’ll have to shorten the plastic pot shaft and machine that knob to add a set screw.  And if you’re installing it on any of the side knobs, then the pot shaft would have to be really short.

It’ll be much easier to install the pot in the pack shell, either on the crank knob or motherboard.  I will be offering extension cables for it as well in case you need one.

Oh, and the vibration motor will come with a little adhesive mounting clip so it is easy to install.



Leave a Reply